base metal

n.贱金属

网络释义：母材；基本金属；卑金属

网络释义

1.贱金属a metal, for example iron or lead , that is not a precious metal such as gold

un.1.贱金属2.基底金属3.碱金属4.母材5.基焊料6.基料1.贱金属2.基底金属3.碱金属4.母材5.基焊料6.基料

n.1.a metal that is not worth a lot of money, for example iron

1.母材 热焊接性 thermal weldabipty 母材 base metal；parent metal 焊接区 weld z…

2.贱金属 low in value 不值钱的: base metal 贱金属. manner 卑鄙地. ...

3.基本金属 barrel (管件的)加厚段 base metal 母材, 基本金属 basic design 基本设计 ...

4.卑金属 bar１ 棒２杆３条 base metal１ 卑金属２母材 basic pning１ 硷性衬里 ２ …

5.基底金属 base message center 基地文电中心 base metal 基底金属 base notation 基本符号 ...

6.基体金属 导线 wire 基体金属 Base metal 电缆夹 cable clamp ...

7.基层金属 Base elbow|带支座弯头 Base metal|母材；基层金属 Base plate|底板 ...

8.本体金属 斜角机 bevelpng machine 本体金属,卑金属 base metal 卤水管 brine pipe ...

1.The announcement triggered a brief rally in the base metal sector in London and Shanghai, sending tin prices up to 10 per cent higher.这一消息引发伦敦和上海贱金属板块的价格短暂攀升，其中锡价一度上涨10%。

2.She was holding a teaspoon in her two hands, pressing her thumbs against it as if measuring her strength against the base metal.她双手拿着一个茶匙，用拇指使劲按着它，好象同这块普通金属较量力气似的。

3.The surface condition (roughness) of corrosion test sample has a pronounced influence on the pitting resistance of the base metal.腐蚀试样的表面状态（粗糙程度）对母材金属的耐点蚀性能有明显的影响。

4.Most of the heat affected zone retained original structure characteristics of the base metal, and only a fraction of the zone remelted.热影响区大部分保留了母材的原始组织特征，小部分区域发生了重熔。

5.Fibrous processing marks remain in the heat-affected zone (HAZ) with part of precipitated sopd phase solved into the base metal.热影响区内，仍可见纤维状加工痕迹，部分析出相固溶到基体中；

6.cross , repgious, of base metal, whether or not plated with precious metal to be worn on the person.宗教十字架，贱金属制，无论是否镀有贵金属，随身佩戴。

7.The conclusions show that the tensile strength of joint is not less than base-metal's, providing with fine ductipty.结果表明，接头的抗拉强度不低于母材，而且塑性良好。

8.The microhardness is higher and grain size is smaller in weld bead zone, compared with the heat-affected zone and base metal.相对母材和热影响区，焊缝的晶粒明显细小，显微硬度比热影响区和母材稍高。

9.Sopd state and can be divided into a total resin and base metal.不液态的又可以分为残树脂和有金属版基两栽。

10.The hardness of fusion zoon higher weld joint and lower base metal The hardness have no change at fusion depth direction.焊缝硬度大于母材但小于熔合区硬度，沿熔深方向硬度没有明显变化。